Homeowners get to the point where they have to do windows installation by themselves. Replacing windows is not complicated as long as you have the proper guidance and the confidence to do it by yourself.
Replacing windows can make a significant difference in a home. It is the easiest way to do a home makeover.
You can do windows replacement during your free time when you are not in a hurry to go somewhere. Changing your windows can have so many positive impacts on your home.
You don’t necessarily have to finish the installation in one day, especially if you are a complete beginner.
Below are the steps for the process of windows Whitby installation.
1. Taking Measurements and Buying the Windows
This is the first and one of the most essential steps. Taking measurements should be done accurately to avoid the expensive consequences of getting the wrong measurements.
When taking the measurements, you should not assume the measurement of one window is similar to another. Every window is customized differently, so the installer should take each measurement separately.
The replacement windows Whitby are made in different sizes by the manufacturers, so you can always find something that fits your current frame.
Getting customized windows is a good idea, but in most cases, they will require some patience for the manufacturers to design. They can also be a bit expensive due to the extra labor and the extra material needed.
Sometimes you may need to customize the existing frame if you want to get a different window than the existing one. When buying the windows, ensure to get the style that meets your needs for window replacement Whitby.
2. Removal of the Old Windows
To leave room for the new windows in Whitby, you will have to remove the old ones. Based on most construction rules, the installer should remove the window from outside the house.
After removing the old window, inspect the frame to ensure everything is in good condition before proceeding to install the new windows. If there are any issues with the framing, consider dealing with that before proceeding to install the new windows.
3. Installation of the New Window
You should remove the sashes and the screen before proceeding to install the new window. This helps minimize any damage to the materials or any impacts on the frame.
Carefully place the window on the opening and check the plumb using a level. Make any adjustments, and once you are satisfied with everything, proceed to secure the door using screws on the flange.
Remember to reinstall the sashes before you proceed to the next step. After installing, you can seal any gaps using silicone to avoid cases of leakages.
4. Installation of the Exterior Trim
The exterior trim should match the architectural style of your home. After installing the trim, use silicone to seal around it to help keep pests and moisture away from your home.
5. Installation of the Interior Trim
You will need to install the interior trim if you are doing windows replacement in Whitby. Apply paint on your new windows Whitby once the caulk dries to make them more attractive.